Silicon carbide powder is super hard particles, can be used as grinding powder, grinding paste. Specifically, there are the following points:

1. glass: plate glass, float glass, glass products (glass jar, glass bottle, glass tube, etc.), optical glass, glass fiber, glass instruments, conductive glass, glass cloth and anti-ray special glass and other main raw materials.

2. ceramic and refractory materials: porcelain embryo material and glaze, kiln with high silicon brick, ordinary silicon brick and silicon carbide and other raw materials. Metallurgy: silicon metal, ferrosilicon alloy and silicon aluminum alloy and other raw materials or additives, flux.

3. construction: concrete, cementitious materials, road building materials, artificial marble, cement physical performance test materials (namely cement standard sand), etc.

4. chemical industry: silicon compounds and sodium silicate and other raw materials, sulfuric acid tower filler, amorphous silica powder.

5. machinery: the main raw materials of casting sand, grinding materials (sandblasting, hard grinding paper, sand paper, emery cloth, etc.).

6. Electronics: electronic filler, high purity silicon metal, optical fiber for communication, etc.

7. rubber, plastic: packing (can improve the wear resistance).

8. coating: can improve the weatherability of coating.

At the same time, because silicon carbide powder is easy to float with the air, so in the process of use, we should pay attention not to let the product secondary pollution:

1. The feeding environment is sealed as far as possible, so it is not easy to fall into large particles with the air flow.

2, rotten packaging of silicon carbide powder as far as possible not to use, rotten packaging may have been mixed with impurities, affecting the cutting effect.

3. In the use of slurry, the use of tools should be controlled to prevent cross-use pollution.

4, the preparation slurry to avoid storage time is too long, if too long will produce solidarity, will also form pseudo particles, may have an impact on the wire cutting.